Dyane4x4innerfrontwing

Dyane 4x4 - reassembly

Inner front wing again. New fixing clips used throughout, high level of finish.These inner wing panels were salvaged from another car I stripped many years ago, and were in very good condition prior to painting.

I made the heavy-duty wing stay plates. The front wing stays often get left off Dyanes, but this leads to flexing and fracturing of the outer wing panel (whether steel or fibreglass).

On the rear wings I replaced the normal 'spire bolts' with stainless steel roofing bolts from Scr*wf*x - which come with a black rubber washer already attached.

Also visible is the very heavy duty galvanised 4x4 chassis manufactured by Louis Barbour.

.